Tag: raspberry pi

An ARM GNU/Linux box for $25. Take a byte!

RaZberry Pi Z-Wave module arrived

The brand new RaZberry did arrive last week. It works like a charm with ago control. Just make sure to use “/dev/ttyAMA0” as device in the “zwave” config section. Kudos to the folks from Z-Wave.Me for this very nice piece

Tagged with: , , ,

Raspberry Pi GPIO support

Thanks to apagg there is a Raspberry Pi GPIO device interface available: http://www.agocontrol.com/trac/browser/agocontrol/agocontrol/devices/raspiGPIO/raspiGPIO.py That makes it very easy and cheap to start with home automation. Just attach relays and binary sensors to the GPIO ports of the Raspberry Pi and configure

Tagged with: , ,

BlinkM RGB LED on Raspberry Pi

ago control now supports BlinkM RGB LED and how to wire and install it on a Raspberry Pi. The BlinkM is controlled via the I2C Bus which is available by default in the Raspberry Pi; you just need to enable it.

Tagged with: , ,

RaZberry Raspberry Pi Z-Wave add on module

We’ll receive samples of the RaZberry Z-Wave add on for the Raspberry Pi soon. So you can expect them to work flawlessly with ago control. You can find more information regarding the module here: http://razberry.zwave.me

Tagged with: , ,

Asterisk PBX Support

You now can remote control a Asterisk PBX with ago control. We just released a interface device for Asterisk PBX support. It communicates via the AMI (Asterisk Management Interface) and supports the “dial” command and announces SIP phones as “phone”

Tagged with: , , ,

Enhanced KNX experience

The KNX driver is now packaged to give better user experience. No need to compile the agoknx daemon yourself anymore. We also provide bcusdk/eibd debian packages for armel, armhf, i386 and amd64 on our mirror. That makes it very easy

Tagged with: , , , , , , ,

Aeon Labs Z-Stick with a Raspberry Pi

A picture of the ago control Raspberry Pi Z-Wave test setup: Runs for some weeks now, no issues.

Tagged with: , , ,

Raspberry Pi packages available

Current packages for the Raspberrry Pi can be found on our mirror. You can install them via apt-get. Add the following to the sources list: deb http://mirror.at.agocontrol.com/debian wheezy main Next run an “apt-get update” and “apt-get install agocontrol agocontrol-admin“. Please

Tagged with: , , , ,
Top